Re: Re: Rotate effect You are here: Home / Latest News/Blog / Re: Re: Rotate effect Home › Forums › Emitters › Rotate effect › Re: Re: Rotate effect April 5, 2012 at 2:18 pm #4023 SharisuParticipant @peterigz wrote: Hello, I’ve attached an example using the fireplace effect from the library. To achieve this I turned off weight (by setting global weight to 0) I added velocity and velocity overtime to both emitters. Then I set the Emission setting on the effects tab to specific and then set the emission angle attribute to 90 degrees. Hope that helps! Oh! Thank you very much. I could understand, it was necessary put a check mark Relative. Very strange that I used did not.